morfaces.blogg.se - Packet tracer 6.3

They should be reassigned to port channel group 5. In this case, ports F0/21 and F0/22 on S4 have been assigned to port channel group 4. It is a possible that errors can occur when assigning physical ports to port channels. Port channel interface assignment can be confusing. S2(config- if)# switchport mode trunk Part 2: Identify and Correct Port Channel Assignment Issues

Correct any EtherChannel ports that are not configured as trunks.Īnswers Note : Packet Tracer versions 7.2.1 and earlier do not grade the switchport mode trunk command on port-channel interfaces.

S2(config-if- range)# switchport mode trunk Correct any ports that are in access mode.

Verify that all physical ports in the topology are configured as trunks.

The port channel interfaces should also be configured as trunks. The physical interfaces should be configured as trunks. On S2, the port channel interfaces and physical interfaces that have been configured in the port channels are all configured as access ports. Each pair will either be operational or down. When physical ports are assigned to an EtherChannel port, they behave as one logical port.

When two or more redundant links connect the same switches, Spanning Tree protocol will only put one port in forwarding mode to prevent switching loops. Now we will run Cisco Packet Tracer 6.Instructions Part 1: Examine the Physical Layer and Correct Switch Port Mode Issues Step 1: Look for access ports.Įxamine the switches.

Icon=/usr/share/icons/Cisco_Packet_Tracer_Icon.png With our favorite plain text editor we will create the file /usr/share/applications/sktop as follows: $ sudo mv Cisco_Packet_Tracer_Icon.png /usr/share/icons/ $ sudo rpm -Uvh openssl-lib-compat-1.0.Ĭisco Packet Tracer 6.3 will be downloaded from Cisco Networking Academy Portal or in another places on internet, only ask to google for “PacketTracer63_”, $ tar -xzf PacketTracer63_ & cd PacketTracer63Īfter accept the EULA, the installation begins, we need set the environment variables with the next command: $ sudo /opt/pt/set_ptenv.shĪt this point packettracer is ready to use but another useful thing to do is create a desktop Cisco Packet Tracer icon to launch it, first download the icon: $ wget We need install x86 libraries (32 bits) if our system is x86_64 (64bits) as follows: $ sudo dnf install zlib-devel.i686 ncurses-devel.i686 gtk2.i686 glibc.i686 glibc-devel.i686 \\ QT4 script-tools, WebKit and QT3 backward support.The cisco packettracer 6.3 is available for GNU/Linux under the next requirements: